| Width | 120mm |
|---|---|
| Diameter | 100mm |
| Height | Short | 180mm Tall | 260mm |
| Light Source | GU10 (Not Included) |
| Wattage | 5-10W |
| Voltage | 240V |
| IP Rating | IP20 (Indoor use only) |
| Finish | Shimmering Slate |
| Material | Clay Ceramic |
| Weight | 2.5kg approx |
| Dimmable | Yes, depending on lamp selected |
| Warranty | 3 Years |
| Installation | If choosing to install outdoors, installation height should be no less than 1.8m above the finished floor level unless the installing licensed electrician determines minimal risk of inadvertent contact as per Section 4.5 of AS/NZ 3000:2018. Light is NOT to be installed above garden beds or in locations where upward water spray is unavoidable. |
| Additional Information | *Each Slate Wall Light is unique, with slight variations in size, glaze finish, and form, including charming beauty spots and natural inconsistencies. These differences give each wall light its own lasting value and character, making it a truly one-of-a -kind piece. |
Handmade Shimmering Ceramic Wall Light | Slate
SKU: WP012WL-1
PRICE: $540.00
- SIZE:
- Short
- Tall
Setting a darker and atmospheric ambience to living rooms, bedrooms or hallways, this stunning slip-cast wall light is handmade from raw and natural ceramic in Tasmania and will spread a pleasant light downwards with a soft upwards glow. Encapsulating the architectural vision of Saxon Hall, a renowned Tasmanian architect, this short or elongated curved fixture will stand out on a timber or concrete wall with its captivating dark charcoal finish and its shimmering effect when bathed in sunlight, reminiscent of a metallic finish. To ensure a perfect fit against the wall, an electrical back plate is included.
Please Note: Due to the firing position within the kiln and handmade process, each piece is unique and may slightly vary in terms of finish.