The Black Adjustable Garden Spot Light raises its optics clear of ground level on a slim post driven into the soil by an integral spike. Each head clamps to the post through a ball joint, sliding to any height along its length and turning through a full circle, so a beam can be set above low planting and re-aimed once shrubs and grasses grow in around it.
The heads are powder coated aluminium with a glass lens recessed inside the barrel, carried on a moulded post light enough to lift and reposition by hand. Holding the optic at height rather than at ground level gives a longer throw across beds and lawn and keeps the source out of the sight line of anyone walking past, which suits driveway edges, garden borders, hedging and beams aimed up into tree canopies. A hooded cover or lens accessory fits over the front of a head where a tighter or more shielded beam is wanted.
Heads clamp to the post on a ball joint and turn through a full circle
Head position adjusts anywhere along the length of the post
Powder coated aluminium optics with a glass lens recessed inside the barrel
Moulded post with an integral ground spike for installation directly into soil
Hooded cover, honeycomb lens and linear lens available as optional accessories
Please Note: Low voltage fitting, must be used with 12V DC or 24V DC driver.
Specifications:
Post Height
1500mm
Post Diameter
16mm
Head Diameter
40mm
Head Length
80mm
Cable Length
2500mm
Beam Angle
40°
Light Source
Single | 1 x Integrated LED
Double | 2 x Integrated LED
Wattage
Single | 2.5W
Double | 5W
Voltage
12V DC or 24V DC
Colour Temperature
3000K, 4000K or 5500K (Switchable)
Lumens
Single | 130lm (3000K), 150lm (4000K), 140lm (5500K)
Double | 2 x 130lm (3000K), 2 x 150lm (4000K), 2 x 140lm (5500K)
Dimmable
Yes - TRIAC | 12V DC only
Driver
Separate 12V DC or 24V DC Driver Required
Materials
Aluminium, Glass & Plastic
Colour
Black
IP Rating
IP65
CRI Rating
CRI>80
Class
Class III | No Earth Required
Application
Outdoor
Accessories
Shade Hood & Lens Accessories Available on Request