The Black Adjustable Garden Spot Light is a compact cylindrical head carried in a yoke bracket above a ground spike. The head tilts within the bracket and the whole fitting turns on the spike, so a beam can be aimed at a tree canopy, a boundary wall, a sculpture or a section of facade, then trimmed again as the planting around it fills out.
The housing is powder coated aluminium with a glass lens set back inside the barrel, which keeps the emitter out of direct view from most approach angles and holds glare down across a garden. A cable runs from the base of the spike back to the supply, and a hooded cover or lens accessory can be fitted over the front of the head where a tighter or more shielded beam is wanted. The result suits uplighting in garden beds, along driveways and against boundary walls, in positions that are pushed into soil and moved later rather than fixed down.
Cylindrical head carried in a yoke bracket that tilts and rotates for aiming
Glass lens set back within the barrel to hold glare down
Powder coated aluminium housing on a ground spike for installation directly into soil
Cable fitted at the base of the spike for connection back to the supply
Hooded cover, honeycomb lens and linear lens available as optional accessories
Please Note: Low voltage fitting, must be used with 12V DC or 24V DC driver.
Specifications:
Diameter
40mm
Length
88mm
Bracket Height
55mm
Spike Length
168mm
Cable Length
2500mm
Light Source
Integrated LED
Wattage
2.5W
Voltage
12V DC or 24V DC
Colour Temperature
3000K, 4000K or 5500K
CRI Rating
CRI>80
Lumens
3000K | 130lm
4000K | 150lm
5500K | 140lm
Dimmable
Yes - TRIAC | 12V DC only
Beam Angle
40°
Driver
Separate 12V DC or 24V DC driver required
Materials
Aluminium & Glass
Finishes / Colours
Black
IP Rating
IP65
Class
Class III | No Earth Required
Application
Exterior
Accessories
Shade Hood & Lens Accessories Available on Request