Proudly handmade in Tasmania this ceramic wall light provides exceptional warmth and ambience to any outdoor space. Crafted with a flecked ceramic, eggshell white low-sheen glaze, and high kiln firing, it ensures a robust, durable form. The custom backplate adds a nearly invisible touch, allowing it to fit on any wall finish snugly.
Featuring a closed ceramic top this IP33 fitting is rated to be used in interior wet areas such as powder rooms and bathrooms and undercover exterior locations that are protected from heavy rain and water sprays (e.g. hoses).
Due to the handmade nature of these wall lights, slight variations in size and finish are to be expected and are to be celebrated.
Specifications:
Width
100mm
Height
180mm
Protrusion
100mm
Weight
2kg
Light Source
GU10 LED Globe (globe not included)
Wattage
5-10W
Voltage
240V
IP Rating
IP33 - For Exterior Use
Finish
Eggshell White
Material
Flek Clay Ceramic
Dimmable
Yes
Warranty
3 Years
Installation
If choosing to install outdoors, installation height should be no less than 1.8m above the finished floor level unless the installing licensed electrician determines minimal risk of inadvertent contact as per Section 4.5 of AS/NZ 3000:2018. Light is NOT to be installed above garden beds or in locations where upward water spray is unavoidable.