| Height | Small | 600mm Large | 1000mm |
|---|---|
| Diameter | 160mm |
| Head Height | 108mm |
| Base Diameter | 153mm |
| Light Source | Integrated LED |
| Wattage | 18W |
| Voltage | 240V |
| Colour Temperature | 3000K, 4000K or 5500K |
| CRI Rating | CRI>80 |
| Lumens | 3000K | 355lm 4000K | 400lm 5500K | 375lm |
| Dimmable | Yes - TRIAC |
| Beam Angle | 120° |
| Materials | Aluminium |
| Finishes / Colours | Black |
| IP Rating | IP65 |
| Application | Outdoor |
Louvred LED Bollard Light
SKU: HVTC262BL - 001
PRICE: $529.00
- SIZE:
- Small
- Large
The Louvred LED Bollard Light is a ground mounted post in powder coated aluminium, finished with a flat cap and a clear head section. Inside that head a stack of angled louvre blades rings the emitter, so light leaving the fitting is broken into horizontal layers rather than escaping as one open glare source. From a standing eye line the blades screen the emitter almost completely, and what registers is the banded head rather than a bright point.
Those blades do the practical work of pushing output downward and outward onto the ground plane, which keeps spill low and leaves surrounding planting dark. Below the head the post is a plain unbroken cylinder, and it surface mounts onto paving, concrete or a prepared footing with the cable entering through the base. The combination of low glare and a controlled throw suits car parks, shared paths, commercial forecourts and long driveway runs, where a fitting has to mark a route without dazzling anyone walking or driving toward it.
- Powder coated aluminium post with a clear head section around the emitter
- Stacked louvre blades screen the emitter and layer the output downward
- Low glare at standing and seated eye level, with light held close to the ground plane
- Plain cylindrical body with the cable entry concealed in the mounting base
- Surface mounts to paving, concrete or a prepared footing
- Suited to car parks, shared paths, forecourts and driveway edges
Specifications:
| Warranty | 3 Years |
|---|