Recessed Slot Step Light in black, the small 110mm faceplate with a short rounded slot.
Small white faceplate, 110mm tall, with one short slot through the powder coated aluminium.
Black step light in the large 185mm size, a long narrow slot running down its centre.
White Recessed Slot Step Light, large 185mm size, its aperture running almost the full length.
Side view of the small black fitting, showing its angled rear body and spring clips.
Angled back housing and steel retaining clips behind the small white plate.
Profile of the large black model, the slim body and clips set behind a thin plate.
From the side, the large white fitting shows a shallow rectangular body behind the face.
Dimension diagram for the small step light showing 110mm height, 38mm width and an 82mm high cut out.
Diagram of the large size giving 185mm height, 40mm width, 32mm depth and a 152mm high cut out.

Recessed Slot Step Light | TriColour

Regular price $69.00

Standard Lead Time: 1 - 2 Weeks

The Recessed Slot Step Light sits almost flush with the wall, leaving only a slim rectangular faceplate with one rounded slot cut through its centre. The LED is set back behind the opening, so the source stays out of sight and light falls in a soft fan across the stair tread or floor below rather than into the eye. Switched off, it is a plain plate that recedes into the wall around it.

The body is powder coated aluminium, and spring clips hold it firmly in its wall cut-out with no visible screws. Set low on a wall, a run of these marks the edges of internal stairs, landings and long hallways, and a single fitting makes a gentle night guide beside a bed or along the aisle of a home theatre, where an overhead light would be too much. It suits pared-back interiors in which the lighting is meant to sit quietly within the architecture.

  • Slim faceplate with a single rounded slot aperture
  • LED set back from the face so the source stays hidden
  • Light directed down and outward across treads and floors
  • Powder coated aluminium body held by concealed spring clips
  • Sits close to flush with the surrounding wall
  • Suited to stairs, landings, hallways, bedrooms and home theatres
SKU: HVT315SL - 001
Height

Small | 110mm

Large | 185mm

Width

Small | 38mm

Large | 40mm

Protrusion6mm
Recess Depth26mm
Cut Out

Small | 33mm (W) x 82mm (H)

Large | 33mm (W) x 152mm (H)

Light SourceIntegrated LED
Wattage3W
Voltage240V
Colour Temperature3000K, 4000K or 5500K
CRI RatingCRI>80
Lumens

3000K | 45lm

4000K | 55lm

5500K | 49lm

DimmableYes
Beam Angle36°
DriverDedicated LED driver included
MaterialsAluminium
Finishes / ColoursBlack or White
IP RatingIP20
ClassClass II | No Earth Required
ApplicationInterior
Warranty 3 Years

The lead time for each product variant is shown above the Add to Cart button. This is our best estimate of how long your piece will take to reach you, from the day you order to delivery at your door. Because we work with designers both in Australia and around the world, lead times differ from product to product.

Ready to Ship: up to 4 weeks
In stock at our supplier's Australian warehouse, ready to be prepared and sent to you.

On Order: up to 8 weeks
Produced or assembled by our supplier after you order, then dispatched.

Made to Order: up to 16 weeks
Handmade or hand-assembled by the designer, specifically for you.

Specially Imported: up to 18 weeks
Imported from one of our international designers. Your order joins the next available shipment and is sent to you once it arrives in Australia.

Pre-Order: month shown
Currently out of stock. The month shown is when new stock is expected at our supplier's warehouse, so please allow extra time for delivery to you after that.

Lead time on request
Stocked by our Australian supplier from time to time, so availability changes. Get in touch, and we'll confirm a current estimate.

Good to know
- If your order includes items with different lead times, they may arrive separately.
- Delivery times can vary depending on your location and courier.

Questions? Contact our team.