Outdoor Linear Step Light in black, small 102mm size, angled to show its slim housing on a flat steel plate.
Short and warm toned, the small solid brass bar sits on its steel plate in this oblique shot.
Small antique brass fitting photographed obliquely, with round holes visible in the plate below its housing.
Narrow housing along the edge of a perforated steel plate on the medium black light, seen at an angle.
Golden brass housing on the medium solid brass coping light, its plate pierced by round holes.
A dark bronze tone marks the medium antique brass housing in this angled view over its perforated plate.
Large black bar, 305mm long, shown at an angle above its steel mounting plate.
Angled view of the large antique brass light, the long housing running the full length of the plate.
Solid brass Outdoor Linear Step Light in the large size, its long housing angled across the frame.
Side profile of the black fitting, a thin flat plate with a square housing hanging below one end.
Antique brass housing seen side-on, hanging beneath a long, flat mounting plate.
In profile, the solid brass block sits under a flat steel plate that stretches away behind it.
Dimension diagram for the small coping light, showing a 102mm length, 82mm depth and 15mm housing height.
Line drawing of the medium size marked 178mm long and 82mm deep, with the housing profile beside it.
Diagram of the large fitting, 305mm long by 82mm deep, with the housing section drawn alongside.
Outdoor Linear Step Light in black, small 102mm size, angled to show its slim housing on a flat steel plate.
Short and warm toned, the small solid brass bar sits on its steel plate in this oblique shot.
Small antique brass fitting photographed obliquely, with round holes visible in the plate below its housing.
Narrow housing along the edge of a perforated steel plate on the medium black light, seen at an angle.
Golden brass housing on the medium solid brass coping light, its plate pierced by round holes.
A dark bronze tone marks the medium antique brass housing in this angled view over its perforated plate.
Large black bar, 305mm long, shown at an angle above its steel mounting plate.
Angled view of the large antique brass light, the long housing running the full length of the plate.
Solid brass Outdoor Linear Step Light in the large size, its long housing angled across the frame.
Side profile of the black fitting, a thin flat plate with a square housing hanging below one end.
Antique brass housing seen side-on, hanging beneath a long, flat mounting plate.
In profile, the solid brass block sits under a flat steel plate that stretches away behind it.
Dimension diagram for the small coping light, showing a 102mm length, 82mm depth and 15mm housing height.
Line drawing of the medium size marked 178mm long and 82mm deep, with the housing profile beside it.
Diagram of the large fitting, 305mm long by 82mm deep, with the housing section drawn alongside.

Outdoor Linear Step Light | TriColour

$65.00

Standard Lead Time: 1 - 2 Weeks

The Outdoor Linear Step Light is a slim bar of light made to sit out of sight along the top edge of a wall. A solid metal housing carries a frosted diffuser strip across its front, and a perforated stainless steel plate runs back from it, so the fitting lies flat on the masonry and the coping tile is laid directly over the plate. Once the tile is set, only the narrow glowing strip remains visible beneath the overhang.

Light is thrown outward from beneath the cap of the wall and falls across the steps, paving or planting in front of it, so the source stays hidden and glare stays out of the eye line. A run of fittings along a retaining wall, raised garden bed, pool surround or terrace edge marks the line of the structure after dark with an even band of light, and the frosted diffuser softens the output into a continuous strip instead of a row of points.

  • Slim bar housing with a frosted diffuser strip along its front face
  • Perforated stainless steel plate that sits under the coping and holds the fitting in place
  • Installs on top of a retaining wall, fence or capped edge and is hidden once the tile is laid
  • Suited to retaining walls, pool surrounds, raised garden beds and terraces

Please Note: 12V DC fittings must be used with a low voltage driver

Please Note: Solid brass will naturally tarnish when installed outdoors, and antique brass may tarnish through its coating

SKU: HVT322SL - 001
Height15mm
Length

Small | 102mm

Medium | 178mm

Large | 305mm

Total Depth82mm
Light SourceIntegrated LED
Wattage

Small | 2.5W

Medium | 5W

Large | 7.5W

Voltage12V DC
Colour Temperature3000K, 4000K or 5500K
CRI RatingCRI>80
Lumens

Small | 
3000K | 140lm 
4000K | 150lm 
5500K | 145lm

Medium | 
3000K | 280lm 
4000K | 300lm
5500K | 290lm

Large | 
3000K | 420lm
4000K | 440lm
5500K | 430lm

DimmableYes
Beam Angle100°
DriverSeparate 12V DC driver required
MaterialsAluminium, Solid Brass, Stainless Steel & Polycarbonate
Finishes / ColoursBlack, Antique Brass or Solid Brass
IP RatingIP65
ClassClass III | No Earth Required
ApplicationOutdoor
Warranty 3 Years
SPEC SHEET

The lead time for each product variant is shown above the Add to Cart button. This is our best estimate of how long your piece will take to reach you, from the day you order to delivery at your door. Because we work with designers both in Australia and around the world, lead times differ from product to product.

Ready to Ship: up to 4 weeks
In stock at our supplier's Australian warehouse, ready to be prepared and sent to you.

On Order: up to 8 weeks
Produced or assembled by our supplier after you order, then dispatched.

Made to Order: up to 16 weeks
Handmade or hand-assembled by the designer, specifically for you.

Specially Imported: up to 18 weeks
Imported from one of our international designers. Your order joins the next available shipment and is sent to you once it arrives in Australia.

Pre-Order: month shown
Currently out of stock. The month shown is when new stock is expected at our supplier's warehouse, so please allow extra time for delivery to you after that.

Lead time on request
Stocked by our Australian supplier from time to time, so availability changes. Get in touch, and we'll confirm a current estimate.

Good to know
- If your order includes items with different lead times, they may arrive separately.
- Delivery times can vary depending on your location and courier.

Questions? Contact our team.

What lights can I put in my bathroom?

How do I light my kitchen?

What lights can I put in exterior/outdoors locations?

What do I need to know about outdoor lights in coastal locations

What globe do I need for my lights?

Does my light need a driver?

How can I dim my lights?

Outdoor Linear Step Light | TriColour - Black / Small

Please enter your details below, so we can prepare a quote.

Handmade glass wall sconce on a white wall with a garden in the background light on
Woven Iron Stripes Pendant Light - Lighting Collective

2026 Lighting Trends & Expert Buying Tips

n 2026, lighting has evolved beyond pure function to become the defining "jewellery" of the home — with tactility, sculptural form, and emotional well-being at the forefront of design thinking. Our expert team's 2026 Lighting Buyers Guide covers the key trends, materials, and technical considerations to help you make confident choices for every room.

This year's dominant aesthetic is "Functional Art" — pieces that serve as striking focal points even when switched off. Standout movements include hand-blown organic glassware with wabi-sabi imperfections, a Mid-Century Modern revival with living brass finishes, bold Brutalist forms, and a growing celebration of local Australian design. Leading materials include aged brass, natural fibres like rattan, and translucent alabaster and stone.

Room by room, the guide recommends a layered lighting approach, with expert advice spanning kitchen linears, bedroom warmth, exterior accent lighting, and the technical essentials — smart integration, CRI ratings, and flexible track systems.

Read our 2026 designer lighting buyers guide