Recessed Brick Step Light in black, the 250mm large size, with a broad hood shielding the lens.
Side view of the 250mm black face fixed to a pale housing, with the hood angled down.
Matte black faceplate at 170mm wide, its hooded opening running across the lower half.
Seen from the side, the medium black unit shows the housing that sits inside the wall.
Small black brick light, 110mm wide, with a shallow hood curving over the frosted lens.
Profile of the 110mm black fitting, the angled hood standing just off the wall face.
Largest antique brass version at 250mm, the solid brass face showing warm brown tones.
The 250mm antique brass face mounted on its pale housing, viewed square from the side.
Antique brass faceplate, 170mm wide, with a fixing screw at each end beside the hood.
In profile, the 170mm antique brass plate and its hood project only slightly from the wall.
Antique brass finish on the 110mm small size, darkened brass with a soft sheen across the hood.
Edge-on look at the small antique brass face and the black body recessed behind it.
Bright brass faceplate on the 250mm large size, with the hood sweeping across its width.
Large brass fitting viewed from the side, face and hood ahead of the white housing.
Recessed brick step light in solid brass at 170mm, bright metal framing a hooded lens.
Medium brass face in profile, showing how far the cowl reaches out over the light.
Polished brass small fitting, 110mm across, with a gentle hood over a narrow lens slot.
Solid brass hood seen side on at the 110mm size, set against the compact black body.
Large drawing showing the 250 x 108mm face, 100mm depth and a 238mm canister.
Medium size drawing with a 170 x 70mm face, 73mm depth and the optional canister.
Dimension diagram for the small size: 110 x 45mm face and 59mm deep, with canister sizes.
Recessed Brick Step Light in black, the 250mm large size, with a broad hood shielding the lens.
Side view of the 250mm black face fixed to a pale housing, with the hood angled down.
Matte black faceplate at 170mm wide, its hooded opening running across the lower half.
Seen from the side, the medium black unit shows the housing that sits inside the wall.
Small black brick light, 110mm wide, with a shallow hood curving over the frosted lens.
Profile of the 110mm black fitting, the angled hood standing just off the wall face.
Largest antique brass version at 250mm, the solid brass face showing warm brown tones.
The 250mm antique brass face mounted on its pale housing, viewed square from the side.
Antique brass faceplate, 170mm wide, with a fixing screw at each end beside the hood.
In profile, the 170mm antique brass plate and its hood project only slightly from the wall.
Antique brass finish on the 110mm small size, darkened brass with a soft sheen across the hood.
Edge-on look at the small antique brass face and the black body recessed behind it.
Bright brass faceplate on the 250mm large size, with the hood sweeping across its width.
Large brass fitting viewed from the side, face and hood ahead of the white housing.
Recessed brick step light in solid brass at 170mm, bright metal framing a hooded lens.
Medium brass face in profile, showing how far the cowl reaches out over the light.
Polished brass small fitting, 110mm across, with a gentle hood over a narrow lens slot.
Solid brass hood seen side on at the 110mm size, set against the compact black body.
Large drawing showing the 250 x 108mm face, 100mm depth and a 238mm canister.
Medium size drawing with a 170 x 70mm face, 73mm depth and the optional canister.
Dimension diagram for the small size: 110 x 45mm face and 59mm deep, with canister sizes.

Recessed Brick Step Light | TriColour

$69.00

Standard Lead Time: 3 - 7 Days

The Recessed Brick Step Light sits within the wall, its rectangular faceplate pressed into a shallow hood that turns the light down onto treads, paths and the ground below. The hood keeps the source tucked out of view, so the light falls across the step without shining into the eyes of anyone walking toward it.

Proportioned to sit within brick and block coursing, it fits neatly into stair risers, retaining walls and garden walls, and the supplied spring clips also allow it to be fixed into plasterboard for stairwells and hallways indoors. Two exposed screws hold the die-cast face in place, a plain, practical detail that sits comfortably against face brick, render or stone.

  • Hooded faceplate that directs light downward and shields the source
  • Recessed into the wall for a low, flush profile
  • Frosted glass diffuser for a soft, even spread across the ground
  • Spring clips supplied for fixing into plasterboard walls
  • Suited to stairs, retaining walls, paths and courtyards
  • Please Note: Aluminium and antique brass fittings should not be installed within 5km of salt water
SKU: HVT301SL - 001
Height

Small | 45mm

Medium | 70mm

Large | 108mm

Width

Small | 110mm

Medium | 170mm

Large | 250mm

Total Depth

Small | 59mm

Medium | 73mm

Large | 100mm

Cut Out

Small | 103mm x 35mm (105mm x 41mm with canister)

Medium | 159mm x 58mm with canister

Large | 238mm x 86mm with canister

Light SourceIntegrated LED
Wattage

Small | 3W

Medium | 6W

Large | 10W

Voltage240V
Colour Temperature3000K, 4000K or 5500K
CRI RatingCRI>80
Lumens

Small | 140lm (3000K), 155lm (4000K), 150lm (5500K)

Medium | 260lm (3000K), 290lm (4000K), 285lm (5500K)

Large | 490lm (3000K), 550lm (4000K), 510lm (5500K)

Dimmable

Small | No

Medium | No

Large | Yes - TRIAC

Beam Angle120°
Materials

Black | Aluminium & Frosted Glass

Antique Brass or Brass | Solid Brass, Aluminium & Frosted Glass

Finishes / ColoursBlack, Antique Brass or Brass
IP RatingIP54
ClassClass I | Earth Required
ApplicationOutdoor
SPEC SHEET

The lead time for each product variant is shown above the Add to Cart button. This is our best estimate of how long your piece will take to reach you, from the day you order to delivery at your door. Because we work with designers both in Australia and around the world, lead times differ from product to product.

Ready to Ship: up to 4 weeks
In stock at our supplier's Australian warehouse, ready to be prepared and sent to you.

On Order: up to 8 weeks
Produced or assembled by our supplier after you order, then dispatched.

Made to Order: up to 16 weeks
Handmade or hand-assembled by the designer, specifically for you.

Specially Imported: up to 18 weeks
Imported from one of our international designers. Your order joins the next available shipment and is sent to you once it arrives in Australia.

Pre-Order: month shown
Currently out of stock. The month shown is when new stock is expected at our supplier's warehouse, so please allow extra time for delivery to you after that.

Lead time on request
Stocked by our Australian supplier from time to time, so availability changes. Get in touch, and we'll confirm a current estimate.

Good to know
- If your order includes items with different lead times, they may arrive separately.
- Delivery times can vary depending on your location and courier.

Questions? Contact our team.

What lights can I put in my bathroom?

How do I light my kitchen?

What lights can I put in exterior/outdoors locations?

What do I need to know about outdoor lights in coastal locations

What globe do I need for my lights?

Does my light need a driver?

How can I dim my lights?

Recessed Brick Step Light | TriColour - Black / Small

Please enter your details below, so we can prepare a quote.

Handmade glass wall sconce on a white wall with a garden in the background light on
Woven Iron Stripes Pendant Light - Lighting Collective

2026 Lighting Trends & Expert Buying Tips

n 2026, lighting has evolved beyond pure function to become the defining "jewellery" of the home — with tactility, sculptural form, and emotional well-being at the forefront of design thinking. Our expert team's 2026 Lighting Buyers Guide covers the key trends, materials, and technical considerations to help you make confident choices for every room.

This year's dominant aesthetic is "Functional Art" — pieces that serve as striking focal points even when switched off. Standout movements include hand-blown organic glassware with wabi-sabi imperfections, a Mid-Century Modern revival with living brass finishes, bold Brutalist forms, and a growing celebration of local Australian design. Leading materials include aged brass, natural fibres like rattan, and translucent alabaster and stone.

Room by room, the guide recommends a layered lighting approach, with expert advice spanning kitchen linears, bedroom warmth, exterior accent lighting, and the technical essentials — smart integration, CRI ratings, and flexible track systems.

Read our 2026 designer lighting buyers guide